VinUnpack
No uploadvPIC 2026-10

Reading a VIN · Guide

VIN 11th Character: What the Plant Code Tells You

The 11th character is a plant code, not a quality score. Here is how to read it, why A means different places for different makers, and what to do when the data is missing.

By KianPublished 2026-11-09Updated 2026-11-095 min read

Position 11 is the plant code

The 11th character of a 17-character VIN identifies the assembly plant. It is assigned by the manufacturer, not by a global registry. That single fact explains most of the confusion around plant codes: there is no international list where A always means the same factory.

A manufacturer that builds the same model in two countries will usually use different plant characters for each site. When a plant closes or a new one opens, the manufacturer can reuse a character for a different location in a later model year. The code is stable within a manufacturer's own scheme, not across the industry. The model-year code at position 10 has its own cycle; the 10th-character year table explains that field.

Why A means different things for different makers

Consider the letter A. For the WMI 1HG (American Honda), the pattern data in NHTSA vPIC maps position 11 A to Marysville, Ohio. For another manufacturer, the same letter may point to a completely different city, or to a plant that no longer exists. Without the WMI, the plant character is not enough to identify a location.

This is why a decoder must look up the plant code together with the manufacturer and the model-year range. A generic table of letters to cities would be wrong for most vehicles. The manufacturer code is the key; the plant character is the value. The same pattern logic applies to the model and engine fields, as explained in why positions 4–8 are manufacturer-specific.

FieldWhat it identifiesWho assigns it
WMI (1–3)Manufacturer and countrySAE / manufacturer registry
Plant code (11)Assembly site within that manufacturerManufacturer
Serial (12–17)Vehicle within the production sequenceManufacturer
The plant code only makes sense together with the WMI

How the public data maps plant codes

NHTSA vPIC is built from VIN patterns submitted by manufacturers. A pattern can tie a range of characters to a plant city, state and country. When a VIN matches the pattern, a decoder can show the location. When no pattern matches, the honest output is the raw character with an explanation.

VinUnpack follows that rule. It looks up the plant through the same pattern data used for model and engine. If a city is available, it shows the city, state and country. If only a company name is available, it shows that. If nothing matches, it prints Plant code: X and adds a note that the plant name is not available for this brand in the current dataset.

Pattern specificity matters here as much as it does for model and engine. A pattern that fixes more characters is a stronger match than one with several wildcards, and the decoder prefers the stronger match. This is why two vehicles with the same WMI and the same plant character can still resolve to different cities if their year ranges or VDS patterns differ. The plant character is only one input; the manufacturer and the model year are part of the lookup key.

The same data can also contain more than one plant name for a single manufacturer over time. A factory that opened in one decade and closed in another will not appear for every model year. When a VIN falls outside the year range attached to a pattern, the decoder should not use that pattern, even if the plant character matches. That is another reason a plant name can be missing for an otherwise valid VIN.

A verified example

In the VIN 1HGCM82633A004352, position 11 is A. The WMI is 1HG, which vPIC identifies as American Honda Motor Co. in the United States. The matching pattern for that WMI and model-year range maps A to Marysville, Ohio. The decoder can therefore show Marysville, Ohio, United States for this vehicle.

That is a complete chain: manufacturer code, then pattern, then plant. Remove any link and the location is no longer certain. A decoder that shows a city without the matching manufacturer and year range is guessing.

What the plant code does not tell you

The plant code is not a quality ranking. Vehicles from the same plant can vary by model year, supplier batch and trim. A plant that built a reliable model in one year may have built a different model in another. The code also does not identify the trim level, the engine or the destination market.

It is also not a complete production record. The plant code says where the vehicle was assembled, not when it rolled off the line, what options it received or whether it was later repaired. For those questions you need the build sheet, the certification label and a history report.

A plant code is sometimes used in online discussions as a shorthand for quality, reliability or a particular generation of a model. That shorthand is not supported by the VIN. Two vehicles from the same plant can have different suppliers, different shifts and different inspection outcomes. The code identifies a location, not a reputation, and it should not be treated as a buying signal on its own.

Check the plant code on your own VIN

Enter the full 17-character VIN. The decoder will show the plant field with the city, state and country when the public pattern data supports it, or the raw code when it does not.

Decode a VIN and see the plant code

Sources

Related guides

Have a 17-character VIN? Decode it free in your browser — no account, no upload.